Design and Build Microcontroller-Based Computer Numerical Control (CNC) Machine

Iqbal Rasyidin; Hamdani; pristisal

doi:10.61306/jitcse.v1i3.73

Authors

Iqbal Rasyidin Universitas Pembangunan Panca Budi
Hamdani Universitas Pembangunan Panca Budi
pristisal Universitas Pembanguann Panca Budi

DOI:

https://doi.org/10.61306/jitcse.v1i3.73

Keywords:

plan, Computer Numerical Control, Microcontroller

Abstract

Computer Numerical Control (CNC) machining is a system that allows automatic control of machine tools using graphically depicted commands. This study was conducted to determine and create microcontroller-based CNC machines for material processing. It is expected that the use of microcontrollers as the main control instrument will allow CNC machines to operate more flexibly and efficiently. The approach to conducting research includes conceptual planning, component selection, electronic system development, operational management, and performance evaluation. CNC machines are designed to use microcontrollers to drive stepper motors and control the motorization process using G-Code data. The findings of the study show that microcontroller-based CNC (computer numerical control) machines can produce outputs with the accuracy and pressure required for material processing applications. According to the results of the performance evaluation, the machine can operate in different time spans and customer types while providing consistent results. As a result, the use of microcontroller-based CNC machines has the potential to be an effective alternative in the development of material processing technologies with automatic controls that can be accessed and adapted for a wide range of industrial applications.

References

Amala, M., & Widyanto, S. A. (2014). Software Development of CNC Trainer Milling Machine Operating System. Journal of Mechanical Engineering S-1, 2(3), 204-210.

Anrinal, Putra, M. I., & Viola, R. O. (2022). View of Manufacturing System Design of a CNC Laser Engraver. Journal of Mechanical Engineering, 12(1), 32–38.

Arkundato, A. (2018). Measurement and Uncertainty. Physics Module, 3(1), 1-35.

Bisono, F. (2017). The X, Y, and Z axis calibration process on the 3 Axis Wooden Router CNC machine uses the help of dial indicator and block gauge. In Proceedings Conference on Design Manufacture Engineering and its Application, 1(1), 350-356.

Budhi, A., Taufik Qurahman, M., & Rasyid, A. (2021). Design of 3 Axis Router CNC Machine Assisted by Autodesk Inverter Software. Journal Mechanical Engineering, 10(1), 1-5.

Choirony, I. V., Hariyanto, M. S., Ulum, M., Ubaidillah, A., Haryanto, & Alfita, R. (2021). Design and build Acrylic Engraver and Cutting Machine using microcontroller-based 3 axis CNC milling. Journal of Electricity, 13(1), 13-21.

Draganescu, F., Gheorghe, M., & Doicin, C.V. (2003). Models of machine tool efficiency and specific consumed energy. Journal of Materials Processing Technology, 141(1), 30-35.

Elmiawan, P., Dharmanto, Adik, Fazalul, M., & Arief, R. (2022). Mach Based Low Budget CNC Router Machine Accuracy 3. Journal of ROTOR, 15(2), 70-75.

Elvys, E. Y., & Sirama. (2015). Improvement of Movement Accuracy in 3-Axis CNC Milling Machine Prototype. Proceedings of the Annual National Seminar on Mechanical Engineering, XIV.

Febryanto, I. D., & Kartikasari, S. D. (2022). The design of the 3 Axis Router CNC Machine is based on the Quality Function Deployment (QFD) method. Journal of Industrial Engineering and Management, 17(1), 13-21.

Firsa, T., Tadjuddin, M., Husaini, S., & Syahriza. (2015). Design and Manufacture of Prototype of PC-Based 4 Axis CNC Machine (Personal Computer). Journal of Mechanical Engineering Unsyiah, 3(2), 75–79.

Harrizal, I.S., Syafri, S., & Prayitno, A. (2017). Design and Build 3 axis CNC Milling Machine Control System using Close Loop System. JOM FTEKNIK, 4(2), 1-8.

Hasibuan, M. R. A., Muhaimin, & Hardi, S. (2019). Design and Build 3 Axis CNC Milling Machine For Arduino Uno Based PCB Anggrave. Journal of TEKTRO, 3(1), 40-47.

Jufrizaldi, M., Ilyas, & Marzuki. (2020). Design and Build CNC Milling Machine Using GRBL Control System for PCB Layout Making. Journal of Applied Mechanical Sciences, 4(1), 37-44.

Marcelina, T., Kusuma Wijaya, D., Tjahyono, R., & Suprijono, H. (2021). Optimization of Acrylic Material Cutting Process on CNC Laser G-Weike LC6090 with Simplex Centroid Design Method and Multi-Response Plot Optimization. GIGA Scientific Journal, 24(1), 23–34.

Miftah. (2013). Implementation of Kuzzy Logic Sugeno Method on Microcontroller-Based Storage Room Temperature Regulation. Library of the University of Education Indonesia, 2(1), 1-10.

Morris, A.S., & Langari, R. (2016). Measurement and Instrumentation: Theory and Application Second Edition. United States of America: Elsevier Inc.

Muchlis, A., Ridwan, W., & Nasibu, I. Z. (2021). Design and Build CNC (Computer Numerical Control) Laser Machines with the Design for Assembly Method. Jambura Journal of Electrical and Electronics Engineering (JJEEE), 3(1), 23–27.

Nugroho, A. B., Auliq, M. A., & Alrasyid, M. Z. (2020). Comparative Analysis of the Performance of CNC Machine Accuracy (Computer Numerical Control) Router Based on Mach 3 and Arduino Uno Using the SQC (Statistical Quality Control) Method. Journal of Electrical and Computational Engineering (ELKOM), 2(2), 75–86.