Design and Build Basic Electronics Trainer as a Practicum Teaching Aid at the Electronics Engineering Laboratory, Universitas Pembangunan Panca Budi, Medan

Sylvia Larasati; Amani Darma Tarigan; Yofie Adinata

doi:10.61306/jitcse.v1i3.75

Authors

Sylvia Larasati Universitas Pembangunan Panca Budi
Amani Darma Tarigan Universitas Pembangunan Panca Budi
Yofie Adinata Universitas Pembangunan Panca Budi

DOI:

https://doi.org/10.61306/jitcse.v1i3.75

Keywords:

Basic Electronics Trainer, Teaching Aids, Learning Media, Practicum

Abstract

This research aims to design and build a basic electronics trainer as a practicum teaching aid at the Electronics Engineering Laboratory, Panca Budi Development University, Medan. The problem faced in the learning process in the industrial automation course is the lack of supporting learning media, so that students have difficulty understanding the theory and its application, especially in the assembly and programming of basic electronic systems. Based on the results of observations, interviews, and questionnaire distribution, it is known that the lack of practicum teaching aids affects the effectiveness of learning.This research method includes the stages of hardware and software design, the manufacture of trainer kits, and the testing of tool functionality. The designed trainer is expected to facilitate students in understanding the basic principles of electronics through interactive and applicable practicums. The use of this trainer aims to provide convenience in understanding theory, as well as improve students' practical skills in assembling and operating basic electronic systems.The result of this study is a basic electronics trainer that can be used as an effective, efficient, and easy-to-operate learning medium. This trainer also makes a significant contribution to increasing student motivation and understanding of the material taught. With this tool, students are expected to be more involved in the learning process, both theoretically and practically, and ready to face challenges in the real industrial world.

References

Berutu, w. (2016). The design of the automatic door bar application uses a motion sensor based on the AT89S51 microcontroller. In Journal of Computer Research (jurikom) (issue 1). Www.stmik-budidarma.ac.id//

FITRIATI, A., I., & AKIL, M. (2018). Design and Build FPGA-Based Digital Electronics Trainer Kits. Journal of INSTEK (Informatics Science and Technology), 3(2), 191-200.

Kadir, N., Asmara, B. P., & Wiranto, I. (2024). Design and build a practicum module on the basics of digital engineering. Jambura Journal of Electrical and Electronics Engineering, 6(1), 82-92.

Pahlevi, r. N. (2022). Analyze and design traffic light gauge systems for emergencies. Journal of informatics science deli, 1(2). Www.arduino.cc

Parmoanto, f. (2022). Analysis of temperature changes between the inverter travo and the winding transformer with additional cooling 1). Journal of informatics science deli, 1(2).

Pramudita, R., & Suryana, A. (2019). Design and build an integrated trainer with a series of wave rectifiers and op-amp amplifiers based on the Atmega 32 microcontroller. Scientific Journal of Applied Information Technology, 6(1), 36-41.

Putra, m., bahri, z., & siregar, m. F. (n.d.). The use of current transformers for the prevention of current discharging. Http://ojs.uma.ac.id/index.php/jesce

Sinaga, a. B. (2021). Implementation of a water level monitoring system in a microcontroller-based reservoir. Journal of minfo polgan, 10(2), 20–24. Https://doi.org/10.33395/jmp.v10i2.11447.

Syahputeri, V. N. (2021). Design and Build a Trainer kit for Basic Electrical and Electronics Application of Fault Finding (Doctoral dissertation, Padang State University).

Tarigan, A. A. (2024). Design and Build Basic Electronics Trainers.

Husain, M. R., Kadriati, I. A., Isminarti, I., & Fitriati, A. (2019). Design and Build Learning Electronic Devices Understand the Characteristics of Bipolar Junction Transistors. Mechatronics Journal in Professional and Entrepreneur (MAPLE), 1(2), 62-66.

Al Abror, A., Baisrum, B., & Satria, F. (2023, August). Design and build a Basic Digital Trainer Kit as a learning medium for digital engineering practicum courses. In Proceedings Industrial Research Workshop and National Seminar (Vol. 14, No. 1, pp. 36-42).